AAP Elite S series Spécifications télécharger pdf (Page 65)

Page 65

any outputs that are on will be shown on the LCD display e.g. if output 1 is on the number 1 will be on. By pressing

the “1” button at the panel keypad, output 1 can be turned off provided it is allowed to be locally controlled. To leave

local command control mode simply press the “Enter” button and the keypad will return to normal operation. If the

“Control” button is enabled at address P786E, and the outputs can be locally controlled, then you can access this

Local Command Control mode directly by simply pressing the “Control” button at the keypad. The LCD display will

show “OUTPUTS” to indicate that local command control is active and you can control outputs as described above.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 102 103

Pas de commentaire

AAP Elite S series Spécifications Page 65